Building a Heated Bar

8 nov. 2020
85 888 Weergaven

This weeks Video is sponsored by Lincoln Electric! Visit them at and
This week i build a heated bar out of a stainless steel bared that i got from the junkyard.
If you like what i do you can support me at:
For more Infos visit

  • Laura you are a cool and beautiful girl! Your hands are magic!

    Ильшат КасымовИльшат КасымовMaand geleden
  • Are we just going to breeze right over that bandsaw cut and glue up? Perfection. 👌🏼

    Gaetano Buffa IIIGaetano Buffa III2 maanden geleden
  • Зачёт.

    ADEN412ADEN4122 maanden geleden
  • I love this project!

    michalsarid Shwartzmichalsarid Shwartz2 maanden geleden
  • I still love the way that you made the tabletop.

    Alan MarstonAlan Marston2 maanden geleden
  • Nice!

    Bill HartBill Hart3 maanden geleden
  • Neat, but I thought you were going to do something more awesome like putting a heated plate above the stove, like a Mongolian bbq.

    Robert GoffRobert Goff3 maanden geleden
  • 😁😁👍👍👍👍

    Eric CartmanEric Cartman3 maanden geleden
  • Gawd I loved that technique you used to scribe the boards together along the lines of live edges instead of straight lines! So clever and unique!

    Keith KlassenKeith Klassen3 maanden geleden
  • Only found your channel a while ago but love the creativity!! So jealous of that workshop.

    Dennis van DijkDennis van Dijk3 maanden geleden
  • Great video thank you. Ms. Laura, what are headphones are those that you're wearing? Are they for music or just sound protection?

    Jock McBileJock McBile3 maanden geleden
  • Moin Laura Ich finde keine Möglichkeit deinen Podcast zu kontaktieren Außer vll mir n facebook account zuzulegen, sag Mal frau Raabe (aber Kampf) das ich ihr empfehle sich mal Autorenwelt anzusehen ;-) hab beruflich gerade mit denen zu tuen und finds super was die für Autoren machen, soll keine Werbung sein nur ne Empfehlung damit weniger bei Amazon und mehr bei Mel hängen bleibt. Sonst bleibt nur: weiter so! Im video und Podcast bereich

    wired namewired name3 maanden geleden
  • We love it! So nice to see our tools being put to such good use :-)

    August Rüggeberg PFERD-WerkzeugeAugust Rüggeberg PFERD-Werkzeuge3 maanden geleden
  • Hi Laura, since you have built so many wood burning ovens I though you might find this useful. Building the fire "upside down" it creates less smoke and CO. I couldn't find the original video, this takes you to a Hungarian group but the video is in German:

    Dávid VargaDávid Varga3 maanden geleden
  • Note on the editing; nice job! The beats start on scene starts, etc. subtle, but very well done !!

    Artie ShellArtie Shell3 maanden geleden
  • what's up with the glitchy facebook-craft-video-music-loop in the background?

    xzcvxzcv3 maanden geleden
  • Super! Aber für die Anfeuerhilfe gibts a dickes, fettes Minus!

    Hans DrufHans Druf3 maanden geleden
  • Bin mir nicht sicher was mir besser gefällt, das Poster von Smudo im Container oder der geniale, beheizte Stehtisch! Mal wieder einfach super!

    skottistuffskottistuff3 maanden geleden
  • Wow, echt cool

    MaxBlumMaxBlum3 maanden geleden
  • 🔥🔥👍👏👏😃

    Andre Artisan ArtistAndre Artisan Artist3 maanden geleden
  • That thing is going to burn some legs

    streglofstreglof3 maanden geleden
  • you should make some bar stools next,

    Nathaniel GregoryNathaniel Gregory3 maanden geleden
  • I love wood and I hate all these stoves using wood as raw material Cheer up from Athens

    kostas toubanakiskostas toubanakis3 maanden geleden
  • I absolutely love your videos, they are so much more than just a build video. Such a nice flow with your choice of music. As always, you inspire me.

    Dans Maker PlaceDans Maker Place3 maanden geleden
  • when are we going to see Laura Kampf building his own custom motorcycle??...I have been doing this question for the last year hahaha

    Tomás AltermattTomás Altermatt3 maanden geleden
  • Very cool

    Makers In the makingMakers In the making3 maanden geleden
  • That’s not about heated bar - that’s about enjoying life 🤙😎 Laura you are cool 🤘🌲 come to Latvia 🌲

    KirBVBKirBVB3 maanden geleden
  • Awesome soundtrack with the steeldrum samples matching the boiler

    S. J.V.S. J.V.3 maanden geleden
  • 嗯 good

    44579643445796433 maanden geleden
  • Brilliant 🥳😉

    Jackie GrantJackie Grant3 maanden geleden
  • Oben kaltes Bier, unten geröstete Nüsse.

    Oliver HöroldOliver Hörold3 maanden geleden
  • Всё хорошо. Можно было сделать решетку на дне( не прогорало бы). Удачи.

    Владимир КалининВладимир Калинин3 maanden geleden
  • Cool! Would be interesting to hear how you landed on that leg design.

    mecyvermecyver3 maanden geleden
  • THat so needs a built in FONDUE POT!!!!

    madox76madox763 maanden geleden
  • I wish i could be as awesome as you. 1:30 i was just wondering why there are no sparks with this kind of welding? What is it called? Newer than a newbie question ^^'

    Qalyo PhQalyo Ph3 maanden geleden
    • That is TIG welding. The sparky one is called MIG

      Laura KampfLaura Kampf3 maanden geleden
  • gefällt mir:-)

    Der TrockenbauerDer Trockenbauer3 maanden geleden
  • i wonder if my bandsaw is good enough to pull off that trick.

    Robert PetersRobert Peters3 maanden geleden
  • Amazing thank you.

    Sylvestre SanchezSylvestre Sanchez3 maanden geleden
  • i need more of this in my life. chill music and nice builds.

    crsmitcrsmit3 maanden geleden
  • Call me when the Glühwein is ready! LOL

    C LandryC Landry3 maanden geleden
  • And now to watch again with the voice over!

    Malt & MakeMalt & Make3 maanden geleden
  • Чудово!

    ВалерійВалерій3 maanden geleden
  • Could you make a tuba out of the coil you took of the barrel ?

    ghismoghismo3 maanden geleden
  • Hallo Laura, jetzt fehlen nur noch 2 BAR-Hocken an dem Tisch :-)

    Dietmar HändelDietmar Händel3 maanden geleden
  • Not afraid the table will bend (it looks like it does that a bit) or even crack because of the fire?

    MrBassjanMrBassjan3 maanden geleden
  • Watch out Laura! 0:17 Shoting in front of the sparks of angle grinder can damage your lenses. I know from personal experience.

    Vicente Varella ForcadaVicente Varella Forcada3 maanden geleden
  • Ich feiere dich...... wie geil ist das denn! 👍

    Daniel LeyDaniel Ley3 maanden geleden
  • Workshop trolley needed for the heavy projects? 😀. Maybe height adjustable?

    No SkillsNo Skills3 maanden geleden
  • I would like to know the temps that metal unshielded skin reaches... Please. I need to know at what "cold temperature" that outer metal is in equilibrium so it won't burn the clothes or skin right off you. 'Cause "design for dumb people, and the universe will give you a dumber one", but a flame next to a metal sheet equals great thermal conductivity. Love your videos. You are great inspiration and this is my first comment ever. Love your channel!!! 😁

    Esteban FranchinaEsteban Franchina3 maanden geleden
  • Sehr coole Idee! Genau das Richtige an solchen Tagen für das Bierchen unter freiem Himmel ...

    SASCH IIISASCH III3 maanden geleden
  • Hi Laura, die Idee die Bretter zusammen zu schneiden ist spitze und sieht super aus! Wenn Du jetzt noch die Scharniere etwas biegst und von hinten anschweißt wäre es perfekt..Gruß

    Jörg PlietkerJörg Plietker3 maanden geleden
  • Those long point miters are tough to make beautiful. Elsewhere, perhaps “welding tips and tricks”, it was suggested to slightly bevel the miter’s long points to create a small “v” in order to give the weld a little “elbow room” for a more attractive bead. Love everything about your videos, the vibe, the skill, the professionalism, the great imagination, the humor, the authenticity, the passion. Vielen dank und Hals und bein bruch. 😉 PS: pls wear a respirator for lung protection. TÅ is now using one in his wonderful forge work including grinding and most other aspects. At 68 I’m wishing I’d been more diligent in caring for my body.

    christopher cartwrightchristopher cartwright3 maanden geleden
  • You could totally market this to restaurants due to our current pandemic! And even in the future this is a splendid idea! Keep up the great work as usual! Such a huge inspiration.

    Adrian RouseAdrian Rouse3 maanden geleden
  • I really liked the use of the handle

    Massimiliano SalzanoMassimiliano Salzano3 maanden geleden
  • Hermoso, como siempre!

    Nicolas CrociNicolas Croci3 maanden geleden
  • Joli travail bravo,mais ça doit chauffer les jambes à la longue, à bientôt salut Jeannot 🛠😉

    Jean LoreaudJean Loreaud3 maanden geleden
  • Ne Sackheizung, ich liebe es....nur wenn mein Bier warm wird, da verstehe ich keinen Spaß ^^ Vielleicht noch nen rausnehmbaren Einsatz im Tisch falls man Glühwein auf Trinktemperatur halten will?

    Guzzist11Guzzist113 maanden geleden
  • Best idea I’ve seen in a long time! Nice job

    FloatncoffeeFloatncoffee3 maanden geleden
  • A cold beer and WARM NUTS... what more can you ask for.

    seccatseccat3 maanden geleden
  • When the postman desperately hopes to have a letter for Kampf, so that he can warm his hands .. 😊.

    das kleineglückdas kleineglück3 maanden geleden
  • I'm pretty new to welding, Just wondering why you done a mixture of tig and mig

    Ade HAde H3 maanden geleden
  • Geile Technik die Bohlen mit Form der Borke miteinander zu verleimen, kannte ich bisher nicht. Danke immer wieder für deine Inspirationen 👌🏼👌🏼

    Lorenz GolombiewskiLorenz Golombiewski3 maanden geleden
  • Smudo sightings: - 0:44 Smu relaxes after giving Laura some last-minute welding tips. - 7:35 (via wall portrait)

    John BodoniJohn Bodoni3 maanden geleden
  • Wow!! nice for winter!

    Draude's WorkshopDraude's Workshop3 maanden geleden
  • Nice project! How does the air get into the heater? Probably I missed the point here you added the venting-openings.

    Dirk EibachDirk Eibach3 maanden geleden
  • Wie nennt man diese Art zu schweissen? Also mit dem Draht? Oder ist das gar nicht schweissen 🤦🏼‍♂️ Bin ein riesen Anfänger was das schweissen anbelangt 😅

    GABRIEL H.GABRIEL H.3 maanden geleden
  • Laura your videos are always fantastic. Music selection is very enjoyable and downright relaxing. Every step of the way I'm engaged in the build process. I can't wait to see the next one!

    EspressoNerdEspressoNerd3 maanden geleden
  • Coole Idee! Was ist denn das für ein Tank, den du verwendest?

    CRUX9891CRUX98913 maanden geleden
  • Super Projekt! Wer braucht da noch nen Heizpilz :-)

    GrasdagglGrasdaggl3 maanden geleden
  • Another cool creation! Thanks for sharing, and as always, be well, stay safe, and take good care!

    Eric StoeverEric Stoever3 maanden geleden
  • For those out there...if you work on vessels that were used for other purposes make sure there are no retained fumes in that tank before cutting and grinding. MANY people have been killed and maimed. Filling it with water before working on it is one trick.

    Stinky Piece of CheeseStinky Piece of Cheese3 maanden geleden
    • There was only water in this vessel. But you are right of course. You need to know what’s inside before cutting it open

      Laura KampfLaura Kampf3 maanden geleden
  • Maybe I'm late, but I have never seen someone glue one board on top of another to get identical, perfectly mating joints! Mind blown! 🤯🤯🤯❤❤❤

    With These HandsWith These Hands3 maanden geleden
    • Check out my video „making a perfect table top“ :)

      Laura KampfLaura Kampf3 maanden geleden
  • Nice project! I do have a couple of questions for you. First: it appears that the container you were working on was stainless steel. When welding some stainless alloys, getting exposure to hexavalent chromium can be an issue. Was that consideration for you? Also, I’m not sure what kind of container you were modifying, but i’m wondering what steps you took to ensure that the gas is contained inside it were safe for both cutting and hot work? Danke!

    Capt ICapt I3 maanden geleden
  • Has anyone said it yet? WunderBAR!

    Matthew WeberMatthew Weber3 maanden geleden
  • Killer look! Super functional. Hope this works well for you this COVID winter.

    Brian PrusaBrian Prusa3 maanden geleden
  • Like always👏🏼

    grn9209grn92093 maanden geleden
  • Great idea, nice execution

    Derek's stuffDerek's stuff3 maanden geleden
  • Fabulous!!!

    VideosferatuVideosferatu3 maanden geleden
  • I'll drink to that! 😉. Great job Laura.

    cwhite4lifecwhite4life3 maanden geleden
  • You sure do like the angle grinder Laura

    Tim CurridTim Currid3 maanden geleden
  • Marvellous idea! Love your new-found timber joining and the recycling of an open-sided shipping container too.

    John PayneJohn Payne3 maanden geleden
  • That bandsaw job on the top was such an awesome idea

    Peter BeathePeter Beathe3 maanden geleden
  • Vous êtes formidable Laura ! Merci

    michel jouvemichel jouve3 maanden geleden
  • Thanks for sharing this wonderful video. In addition to your metal origami, you have an artistic eye and foresight of design. Wishing you and your companion peace, health and happiness. Again, sincere thanks for sharing your design journey. Peace Laura.

    Cat GyntCat Gynt3 maanden geleden
  • Spannende Art zu fügen!

    eingemaischt eeingemaischt e3 maanden geleden
    • @Yanell D. Ja, nur sehe ich als Laie es hier das erste Mal mit einer Bandsäge und nicht mit einer Abrichte.

      eingemaischt eeingemaischt e3 maanden geleden
    • 'fügen' schreiner-fachausdruck bedeutet... das vorbereiten der brettlängskanten um dann mehrere passgenau zu einer überbreiten holzplatte verleimen zu können.

      Yanell D.Yanell D.3 maanden geleden
  • Smart

    EHAB RABADIEHAB RABADI3 maanden geleden
  • Great addition to the Containerzebo.. 🤔Caution.. when the joints on the table top look like straight lines... you've reached your beverage limit. 😩

    Ray BannRay Bann3 maanden geleden
  • Mega Idee! Deine Variante der Tischplattenherstellung begeistert mich immer wieder, sobald ich ne vernünftige Bandsäge habe, probier ich das auch mal! Viele Grüße Nico von Nico's Projects

    Nico's ProjectsNico's Projects3 maanden geleden
  • awesome work and design!!! love your videos

    SantosSantos3 maanden geleden
  • Na dann mal Prost!

    TheGreenGuyTheGreenGuy3 maanden geleden
  • I saw the photo on the wall, did something happen to Rudi?

    Adrian TacheAdrian Tache3 maanden geleden
  • Very smart to attach the hinges before cutting the rest of the door! Great project, as always.

    intent2modulateintent2modulate3 maanden geleden
  • Super cool project as always

    Eric Meyer - MakerEric Meyer - Maker3 maanden geleden
  • why so many projects that burn wood and pollute?

    gabe intagabe inta3 maanden geleden
  • Great. Wird nur an den Fingern heiß, wenn man die Tür des Ofens öffnet :-)

    Vincent DiekeVincent Dieke3 maanden geleden
  • nice build, however i see it becoming quite difficult to empty the ashes from the bottom, perhaps a removeable bottom tray?

    frank molloyfrank molloy3 maanden geleden
  • How cool would it be to get to hang out with Laura, have a cold beer, and be able to pick her brain? Great as always!

    Zach MillerZach Miller3 maanden geleden
  • Cool build just one thing, isnt it hot to have a metal handle on that?

    Growtopia iSurgGrowtopia iSurg3 maanden geleden
  • Awesome. Keep up the great work.

    Firth FabricationsFirth Fabrications3 maanden geleden
  • Liked it before I watched it! Wasn't disappointed. If I make one it will have a place to heat food on top, 'cause, you know, nachos...

    Paul Buckel JrPaul Buckel Jr3 maanden geleden